AIM-4D Falcon Missiles with launch rails for F-4D/E (4 pcs) (3D Printed) Scale 1:32 ResKit RS32-0490 for Aircraft Model Kit

ResKit RS32-0490 AIM-4D Falcon Missiles with launch rails (4 pcs) is a 3D Printed weapons set for 1/32 builds of the F-4D/E, providing four missiles plus launch rails with crisp edges and consistent geometry.

This set is useful when you want uniform stores on symmetrical stations and clean rail-to-missile alignment that remains sharp after primer and paint.

For modelers: remove supports in small steps with a fine saw/cutters, then clean attachment points gradually. Dry-fit the rails on your pylons first, then test-fit missiles to confirm straight alignment before primer.

Product Specifications

• Subject: AIM-4D Falcon Missiles with launch rails (4 pcs)
• Variant / Family: for F-4D, F-4E (kit-dependent)
• Scale: 1/32 (also written as 1:32)
• Product type: Weapons Set
• Type of equipment: Aircraft
• Recommended kit: Any / Universal
• Manufacturer: ResKit
• Country of manufacture: Ukraine
• Material: 3D Printed
• SKU: RS32-0490

This item is part of ResKit and belongs to Aftermarket. Browse more in ResKit Arms and Weapons or compare with Arms and Weapons (all brands). For matching builds, see Aircraft Model Kits and 1/32 Aircraft Model Kits.

FAQ

How should I remove supports from the 3D printed parts?

Cut supports in small sections and avoid twisting thin fins or rail edges. Clean attachment points gradually with light sanding to keep edges sharp.

Should I assemble missiles to rails before painting?

Dry-fit first to confirm contact points and alignment. Many builders prime and paint separately, then assemble once the rail-to-missile fit is confirmed.

How can I keep the rails straight and matched side-to-side?

Use one rail as a reference and mirror the position on the opposite side during dry-fit. Check alignment from front and bottom views before the joint fully sets.