AIM-7E2 Sparrow III Missiles (4 pcs) (F-4, F-15, F-16, F-14) (3D Printed) Scale 1:48 ResKit RS48-0456 for Aircraft Model Kit

ResKit RS48-0456 is a 1/48 AIM-7E2 Sparrow III missiles set with 4 pieces, produced in 3D printed resin to keep the missile body straight and the fin edges crisp. In 1/48, Sparrow fins and noses are easy to soften with paint, so a set with consistent geometry helps a paired loadout look uniform across stations.

Aftermarket resin accessory designed for aircraft scale model kits.

Highly detailed resin parts intended for accurate 1/48 scale aircraft models.

Sparrows are often carried in matched positions, which makes symmetry important. Replacing kit parts can improve fin thickness, trailing edge definition, and overall consistency so the underside looks cleaner when viewed from front and rear angles.

For modelers: dry-fit each missile to your kit rails or recessed bays and check clearance before painting. Prime lightly to preserve fine edges, paint missiles separately, and attach them late in the build; use a simple alignment guide to keep all four missiles parallel.

Compatible aircraft

• McDonnell Douglas F-4 Phantom II
• McDonnell Douglas F-15 Eagle/Strike Eagle
• General Dynamics F-16 Fighting Falcon
• Grumman F-14 Tomcat

Product Specifications

• Subject: AIM-7E2 Sparrow III Missiles (4 pcs)
• Scale: 1/48 (also written as 1:48)
• Product type: Weapons Set
• Type of equipment: Aircraft
• Recommended kit: Any / Universal
• Service / Subject country: USA
• Manufacturer: ResKit
• Country of manufacture: Ukraine
• Material: Resin / 3D Printed
• SKU: RS48-0456

This item is part of ResKit and belongs to Aftermarket. Browse more in ResKit Arms and Weapons or compare with Arms and Weapons (all brands). For matching builds, see Aircraft Model Kits and 1/48 Aircraft Model Kits.

FAQ

Will these missiles fit any 1/48 kit listed as compatible?

The set is listed as Any / Universal, but rail and bay interfaces can be kit-dependent. Dry-fit to your kit mounting points and adjust the contact area as needed.

How should I prepare 3D printed resin missiles before painting?

Wash the parts thoroughly, let them dry completely, then apply a thin primer coat. This improves paint adhesion while keeping fin edges crisp.

How can I keep all four Sparrows aligned consistently?

Install missiles after the main painting is complete and check alignment from front and rear views. Using a straight edge as a reference helps keep them parallel.