B43-1 External Stores Set (2 pcs) (A-4, A-6A/E, A-7C/E, B-47B/E, B-58A, F-100D/F, F-104A/C, F-105D/F, F-111A/D/E/F, F-4C/D/E) (3D Printed) Scale 1:48 ResKit RS48-0589 | Unassembled Plastic Display Model

ResKit RS48-0589 is a 1/48 scale model accessory set of B43-1 external stores (2 pcs) made as resin 3D printed parts. The set focuses on a clean, symmetrical body shape with crisp surface breaks, helping the store look more refined than softer kit parts once primer and paint are applied.

Aftermarket resin accessory designed for aircraft scale model kits.

Highly detailed resin parts intended for accurate 1/48 scale aircraft models.

On 1/48 jet builds, a centerline or underwing store is very noticeable. A smoother profile and consistent proportions help the loadout look balanced and intentional without drawing attention to print artifacts.

For modelers: do a test-fit to your kit pylon or rack before painting and consider adding a small pin for a stronger joint (kit-dependent). Remove supports gradually and prime in thin coats to preserve surface definition.

Compatible aircraft

• A-4 Skyhawk,
• A-6 Intruder
• A-7 Corsair II,
• B-52 Stratofortress
• B-58 Hustler,
• F-100 Super Sabre
• F-104 Starfighter,
• F-105 Thunderchief
• F-111 Aardvark,
• F-4 Phantom II

Product Specifications

• Subject: B43-1 external stores (2 pcs)
• Scale: 1/48 (also written as 1:48)
• Product type: scale model accessory set
• Type of equipment: Aircraft
• Recommended kit: Any / Universal (kit-dependent)
• Manufacturer: ResKit
• Country of manufacture: Ukraine
• Material: Resin / 3D Printed
• SKU: RS48-0589

This item is part of ResKit and belongs to Aftermarket. Browse more in ResKit scale accessories or compare with scale model accessories. For matching builds, see Aircraft Model Kits and 1/48 Aircraft Model Kits.

FAQ

Will these fit any 1/48 kit?

The set is listed as Any / Universal, but pylons and rack interfaces differ between kits. Dry-fit first and adjust the mounting point as needed (kit-dependent).

How should I prepare resin 3D printed parts before painting?

Wash the parts, let them fully dry, then remove supports and smooth contact points. Prime lightly in thin coats to keep surface edges crisp.

What is a simple way to keep the store aligned on the pylon?

After the first test-fit, add a small pin or locating hole to prevent rotation. This helps keep the store centered during final assembly.

Important: This is a non-functional scale model accessory intended only for plastic model kits, dioramas, and display builds. It is not usable as a real-world component or self-defense product.