BAe Harrier GR1/GR3, Canopy Painting Masks Scale 1:48 (Recommended for kit: Kinetic) Metallic Details MDM4811 - For Aircraft Kit Model

Metallic Details MDM4811 is a set of self-adhesive canopy painting masks for 1/48 builds of the BAe Harrier GR1/GR3, recommended for Kinetic kits. The masks are designed to help you define canopy frame lines cleanly and keep glazing edges consistent during painting.

Harrier canopies combine clear panels with tight framing lines that can look uneven when cut by hand. This set supports a more controlled masking layout, which is especially helpful if you plan layered work such as an interior frame color followed by the exterior finish.

For modelers: test-fit each mask segment on the clear part before paint, and burnish edges with a cotton bud to prevent seepage. Spray light coats rather than one heavy pass, then remove masks soon after the final coat flashes off to reduce the chance of lifting paint along the edges.

• Subject: BAe Harrier GR1/GR3 canopy
• Variant / Family: Harrier GR1 / GR3 (kit-dependent)
• Scale: 1/48 (also written as 1:48)
• Product type: Painting Masks
• Type of equipment: Aircraft
• Recommended kit: for Kinetic
• Service / Subject country: option-dependent (operator markings kit-dependent)
• Manufacturer: Metallic Details
• Country of manufacture: Ukraine
• Material: Masking paper (self-adhesive)
• SKU: MDM4811

This item is part of Metallic Details and belongs to Aftermarket and Painting Masks. For matching projects, browse 1/48 aircraft model kits and all Aircraft Model Kits.

FAQ

Do these masks cover both inside and outside canopy frames?

The set is intended for canopy painting, but coverage can be layout-dependent. Check the mask arrangement against your clear parts before committing to an inside-frame workflow.

How do I avoid paint bleeding under the mask edges?

Burnish the edges firmly and apply several light coats. If needed, you can seal edges with a very light pass of the base clear color before the main frame color.

When should I remove the masks?

Remove them after the final coat has set but before it fully hardens. This helps reduce the chance of tearing along the frame line.