Bell AH-1G Cobra, Exterior Detailing sets (Photoetch & 3D-Printed) Scale 1:32 (Recommended for kit: ICM) Metallic Details MDR3220 - For Helicopter Model Kits

Metallic Details MDR3220 is an exterior detailing set for the Bell AH-1G Cobra in 1/32, recommended for ICM kits. The set combines photo-etched parts and 3D-printed resin parts to refine visible external features, with a focus on the engine-area detailing described by the manufacturer.

On a 1/32 helicopter, exterior details around vents, grilles, and access areas can draw attention because they sit on large, smooth surfaces. Mixed-media parts help keep these features thin and crisp, supporting open-panel or close-up display builds (final fit depends on your kit’s tooling and assembly choices).

For modelers: plan the sequence before closing the fuselage—dry-fit the kit parts with the upgrade pieces and confirm where paint breaks will be. Prime photo-etched parts lightly, and attach them after the main airframe sanding is finished to avoid bending. If you intend to highlight engine-area depth, paint the internal surfaces first, then add external PE and 3D parts as the last structural step.

• Subject: Bell AH-1G Cobra
• Variant / Family: AH-1G Cobra (kit-dependent)
• Scale: 1/32 (also written as 1:32)
• Product type: Detail Set
• Type of equipment: Helicopter
• Recommended kit: for ICM
• Service / Subject country: operator-dependent
• Manufacturer: Metallic Details
• Country of manufacture: Ukraine
• Material: Photo-etched metal, resin (3D-printed)
• SKU: MDR3220

This item is part of Metallic Details and belongs to Aftermarket and Exterior Details. For related helicopter upgrades, browse Helicopter Model Kits and 1/32 helicopter model kits. For more upgrade categories, see Engines and Antennas/Radar/Sensors.

FAQ

Is this set designed for a specific kit brand?

Yes. It is recommended for ICM 1/32 AH-1G Cobra kits. Dry-fit parts before paint to confirm alignment with your kit.

Do photo-etched parts need special preparation?

Lightly prime them and handle with tweezers. Attach PE after major sanding is finished to avoid bending thin parts during airframe work.

What’s a good order of work for engine-area detail?

Paint internal surfaces first, then add external PE and 3D-printed parts once the fuselage is stable. This helps keep fine detail clean and reduces handling damage.