Bell AH-1G Cobra, Painting Masks Scale 1:32 (Recommended for kit: ICM) Metallic Details MDM3202 - For Helicopter Model Kit

Metallic Details MDM3202 Painting Masks are self-adhesive masks for a Bell AH-1G Cobra build in 1/32, designed for the ICM kit. The practical focus is canopy framing: masks help keep glazing edges consistent and reduce time spent correcting uneven borders.

The AH-1G Cobra has prominent clear parts that sit at the visual center of the finished model. Clean canopy lines support a tidy overall finish without adding extra parts or changing the kit structure.

For modelers: apply masks on fully cleaned, dry clear parts (remove fingerprints and mold-release). Burnish edges with a cotton swab, then spray light coats from the frame toward the center; peel masks after the paint has set but before it becomes brittle to reduce chipping.

• Subject: Bell AH-1G Cobra
• Variant / Family: AH-1 Cobra family (kit-dependent)
• Scale: 1/32 (also written as 1:32)
• Product type: Painting Masks
• Type of equipment: Helicopter
• Recommended kit: for ICM
• Service / Subject country: operator-dependent
• Manufacturer: Metallic Details
• Country of manufacture: Ukraine
• Material: Masking paper (self-adhesive)
• SKU: Metallic Details MDM3202

This item is part of Metallic Details and belongs to Aftermarket and Painting Masks. For matching projects, browse Helicopter Model Kits Scale 1/32 and all Helicopter Model Kits.

FAQ

Are these masks only for the ICM kit?

The set is listed for ICM. Other toolings can differ in canopy geometry, so compare the mask layout with your clear parts before use.

Should I mask the inside or the outside of the canopy?

This type of set is used on the outside for frame lines. If you plan interior frame color, paint that first on the inside, then proceed with exterior masking and outer colors.

How do I prevent paint bleed under the mask edges?

Burnish edges gently and spray light coats. Avoid flooding the edge with a wet pass, especially near corners and compound curves.