Bristol Beaufort, Cowlings, Propeller and Engines Detailing set (3D-Printed) Scale 1:72 Metallic Details MDR72107 - For Model Kits Aircraft

Metallic Details MDR72107 is a 3D-printed resin detailing set for the Bristol Beaufort in 1/72 scale, covering cowlings, propellers, and engine parts. The set focuses on the front area where cowling openings, propeller hubs, and engine depth can be noticeable.

The cowling-to-propeller area is a focal point on twin-engined aircraft builds. This set can help keep that area consistent across both nacelles while remaining kit-dependent for final fit.

The Bristol Beaufort is a twin-engined aircraft, and small differences in nacelle geometry can affect the overall appearance. Use this set to match the configuration you are building, based on your chosen references.

For modelers: dry-fit the cowling parts to your kit nacelles before committing to glue, and check that the propeller clearance and alignment are symmetrical left-to-right. Paint engines and cowlings separately when possible, then assemble after finishing work to keep edges clean. If your kit has shallow locating points, add a simple pin or short rod for a more secure propeller mount.

Product specifications

• Subject: Bristol Beaufort
• Variant / Family: Bristol Beaufort (nacelle details can be kit-dependent)
• Scale: 1/72 (also written as 1:72)
• Product type: 3D Printed Set
• Type of equipment: Aircraft
• Recommended kit: for Any / Universal 1/72 Bristol Beaufort kits
• Manufacturer: Metallic Details
• Country of manufacture: Ukraine
• Material: Resin (3D-printed)
• SKU: MDR72107

This item is part of Metallic Details and belongs to Aftermarket, Engines, and Propeller Sets and Rotors. For matching projects, browse 1/72 aircraft model kits and all Aircraft Model Kits.

FAQ

Is this set suitable for any 1/72 Bristol Beaufort kit?

The set is listed as Universal for 1/72 Bristol Beaufort kits. Fit and alignment can vary by tooling, so dry-fit the cowling parts to your nacelles and adjust contact surfaces as needed.

What is a practical way to keep both nacelles looking symmetrical?

Test-fit one side, then mirror the same cowling depth and propeller spacing on the other side using a simple measurement (a strip of plastic, caliper, or marked tape). Check alignment from front and top views before final bonding.

How should I prepare 3D-printed resin parts before painting?

Wash parts to remove residue, remove supports carefully, and lightly sand mating faces. Prime before painting, and use CA or epoxy for assembly depending on the working time you want.