Canopy set for aircraft model Lockheed F-104 Starfighter (for Hasegawa) Scale 1:48 Metallic Details MDR4890

Metallic Details MDR4890 is a canopy detailing set for the Lockheed F-104 Starfighter in 1/48, designed for the Hasegawa kit. It combines photo-etched and 3D-printed parts to refine cockpit canopy features where thin frames, rails, and small fittings are difficult to reproduce cleanly with standard kit parts (fit is kit-dependent).

The practical angle is canopy-edge definition: the F-104’s cockpit area is compact and highly visible, and canopy details can stand out even on a closed-canopy build. Thin metal parts help keep edges sharp, while 3D-printed items can add relief where a flat piece would look simplified.

The F-104 is a supersonic interceptor aircraft type. This set targets canopy-area interior detailing only, so you can integrate it without changing external finishing choices.

For modelers: test-fit the clear canopy early and confirm hinge/rail alignment before painting. Prime PE and 3D-printed parts to unify surfaces, then paint in subassemblies so the clear part remains clean. Use small amounts of adhesive near edges to avoid fogging, and add the most delicate pieces after final polishing and masking work is complete.

• Subject: Lockheed F-104 Starfighter
• Variant / Family: F-104 family (kit-dependent)
• Scale: 1/48 (also written as 1:48)
• Product type: Detail Set (Photo-Etched Set + 3D Printed Set)
• Type of equipment: Aircraft
• Recommended kit: for Hasegawa
• Manufacturer: Metallic Details
• Country of manufacture: Ukraine
• Material: Photo-etched metal / resin (3D-printed)
• SKU: MDR4890

This item is part of Metallic Details and belongs to Aftermarket. For related cockpit items, browse Cockpit & Cargo Bay and Interior Details. For matching projects, see 1/48 aircraft model kits and all Aircraft Model Kits.

FAQ

Is this set intended for a specific kit brand?

Yes. It is listed for the Hasegawa 1/48 F-104 Starfighter kit. Test-fit canopy parts early because clear-part geometry can vary between boxings.

Does the set include a new clear canopy?

The description lists photo-etched and 3D-printed parts for canopy detailing. It does not state that a replacement clear canopy is included.

How can I avoid fogging the clear parts during installation?

Use minimal adhesive and keep it away from visible clear areas. Apply small amounts along contact points, and let each step cure before handling the canopy again.