Douglas A-1 Skyraider, Propeller set (3D-Printed) Scale 1:72 Metallic Details MDR7283 - For Aircraft Model Kits

Metallic Details MDR7283 is a 3D-printed propeller detailing set for the Douglas A-1 Skyraider in 1/72. It is intended for builds where prop blade thickness and hub definition are prominent at the nose and the kit parts look soft once paint is applied.

Propeller geometry reads strongly in small scale: clean blade edges and consistent blade spacing help the front end look balanced, especially on models displayed head-on.

For modelers: dry-fit the hub to your kit’s spinner/shaft arrangement and check that the prop sits centered before glue. When you install the blades, keep the pitch and spacing consistent—mark a simple reference line on a piece of card to align the tips while the adhesive cures. Prime 3D-printed parts before painting, and keep paint thin on mating faces to preserve fit.

• Subject: Douglas A-1 Skyraider propeller
• Variant / Family: A-1 Skyraider family (kit-dependent)
• Scale: 1/72 (also written as 1:72)
• Product type: 3D Printed Set
• Type of equipment: Aircraft
• Recommended kit: Universal (for compatible 1/72 A-1 Skyraider kits)
• Service / Subject country: option-dependent (multiple operators)
• Manufacturer: Metallic Details
• Country of manufacture: Ukraine
• Material: 3D-printed parts
• SKU: MDR7283

This item is part of Metallic Details and belongs to Aftermarket and 3D Printed Set. For a matching base kit, browse 1/72 aircraft model kits and all Aircraft Model Kits.

FAQ

Is this set made for a specific kit brand?

No. It is listed as universal for compatible 1/72 A-1 Skyraider kits. Compare the kit’s prop shaft and spinner/hub arrangement during test-fit.

How can I keep blade pitch and spacing consistent?

Use a simple alignment guide: mark a reference line on card or tape, then position each blade to match the same angle and tip distance while the adhesive cures.

Should I paint the propeller before or after installation?

Either approach works. If you paint before assembly, keep mating faces clean for glue. If you paint after assembly, mask the hub area lightly to avoid paint buildup around the root joints.