Eurocopter AS365 Dauphin. Main Rotor Scale 1:72 Metallic Details MDR7253

Metallic Details MDR7253 is a 3D-printed main rotor detailing set for AS365 Dauphin / SA 365 Dauphin 2 and HH/MH-65 Dolphin helicopter builds in 1/72. The set covers the rotor head area, including hub geometry and blade-root detail that is visible from above on a finished model.

This is an aftermarket set for 1/72 helicopter kits of the listed Dauphin-family subjects. The base kit is not included.

On rotorcraft, rotor hub shape and blade alignment are easy to see. Keeping blade pitch and spacing consistent across all blades helps keep the rotor assembly uniform at this scale.

For modelers: build a simple alignment jig before using adhesive (a marked circle on card works) to keep blade angles even. Dry-fit the rotor mast and check clearance under the canopy line and any antennae. Prime early to check edge cleanup, then paint the hub separately and attach the blades after the finish coat to reduce handling marks.

• Subject: Eurocopter AS365 Dauphin / SA 365 Dauphin 2, HH/MH-65 Dolphin
• Variant / Family: Dauphin family main rotor
• Scale: 1/72 (also written as 1:72)
• Product type: 3D Printed Set
• Type of equipment: Helicopter
• Recommended kit: for compatible 1/72 Dauphin-family helicopter kits (fit check recommended)
• Service / Subject country: option-dependent (multiple operators)
• Manufacturer: Metallic Details
• Country of manufacture: Ukraine
• Material: 3D-printed parts
• SKU: MDR7253

This item is part of Metallic Details and belongs to Aftermarket and Propeller sets and Rotors. For matching projects, browse 1/72 helicopter model kits and all Helicopter Model Kits.

FAQ

Is this rotor set limited to one specific 1/72 kit brand?

The set is intended for 1/72 Dauphin-family builds, but rotor mast diameter and mounting geometry can vary by kit. Test-fit the hub to the mast and adjust contact points as needed.

How can I keep blade pitch consistent?

Use a simple jig: mark equal blade positions on a circle and compare blade angles from above. Let each blade joint set before moving to the next to reduce drift.

When should I attach the rotor to the model?

It is usually safer to complete most painting and handling first, then attach the rotor near the end. This reduces the chance of bending blades or knocking small parts loose.