Fiat CR,42 Falco, Detailing sets Propeller set (3D-Printed) Scale 1:32 (Recommended for kit: ICM) Metallic Details MDR3238 - For Model Kits Aircraft

Metallic Details MDR3238 is a 3D-printed propeller upgrade for the Fiat CR.42 Falco in 1/32, recommended for the ICM kit. On a biplane, the propeller sits in a very open, uncluttered nose area, so cleaner blade shape and a sharper hub profile are easy to notice on the finished model.

This is an upgrade set only (the aircraft model kit is not included). Fit is intended for ICM; confirm the hub seating and shaft interface during dry-fit before paint.

The CR.42’s nose area is a focal point in front-quarter views. Keeping the propeller centered and the blade pitch consistent helps the aircraft look “square” when the cabane struts and wing geometry are already demanding careful alignment.

For modelers: test-fit the propeller on the kit shaft and check it spins true without wobble. If needed, lightly ream the mounting hole rather than forcing the part. Paint the propeller separately and install late, after rigging/strut handling is complete, to reduce the chance of chipping or bending during assembly.

• Subject: Fiat CR.42 Falco
• Variant / Family: CR.42 family
• Scale: 1/32 (also written as 1:32)
• Product type: 3D Printed Set
• Type of equipment: Aircraft
• Recommended kit: for ICM
• Manufacturer: Metallic Details
• Country of manufacture: Ukraine
• Material: 3D-printed resin
• SKU: MDR3238

This item is part of Metallic Details and belongs to Aftermarket and Propeller sets and Rotors. For compatible projects, browse 1/32 aircraft model kits and Aircraft Model Kits.

FAQ

Is this propeller set intended for the ICM 1/32 CR.42?

Yes. It is listed as recommended for ICM. Dry-fit the hub to the kit shaft before painting to confirm the interface.

How do I avoid propeller “wobble” after installation?

Check the mounting hole is square to the hub face and that the shaft is straight. Adjust by lightly reaming the hole rather than forcing the fit.

When should I install the propeller on a biplane build?

Many builders install it late, after struts and other handling-heavy steps are complete. This helps avoid accidental damage while aligning the upper wing.