General Dynamics F-16C block 40-52 Fighting Falcon Wheels set Scale 1:72 ResKit RS72-0025 for Aircraft Model Kit

ResKit RS72-0025 is a Wheels Set for 1/72 builds of the General Dynamics F-16C Block 40-52 Fighting Falcon. The resin / 3D printed parts emphasize hub face definition and cleaner tire geometry, which helps at 1/72 where the main wheels can look flat or under-detailed.

Aftermarket resin accessory designed for aircraft scale model kits.

Highly detailed resin parts intended for accurate 1/72 scale aircraft models.

On an F-16, the landing gear sits prominent under the intake and wing roots, so sharper wheel detail can improve the “parked stance” look without changing the kit struts. Fit remains kit-dependent because different manufacturers use different axle diameters and wheel seating depth.

For modelers: test-fit the wheels on the kit axles and adjust the mounting hole gradually so both sides sit at the same depth. Prime lightly to preserve the hub relief, then paint the tires and hubs in separate steps for a clean demarcation.

Product Specifications

• Subject: General Dynamics F-16C Block 40-52 Fighting Falcon
• Scale: 1/72 (also written as 1:72)
• Product type: Wheels Set
• Type of equipment: Aircraft
• Recommended kit: Any / Universal
• Subject country: USA
• Manufacturer: ResKit
• Country of manufacture: Ukraine
• Material: Resin / 3D Printed
• SKU: RS72-0025

This item is part of ResKit and belongs to Aftermarket. Browse more in ResKit Wheels or compare with Wheels (all brands). For matching builds, see Aircraft Model Kits and 1/72 Aircraft Model Kits.

FAQ

Will these wheels fit any 1/72 F-16C kit?

The set is listed as Any / Universal, but axle diameters and wheel seating vary by kit. Test-fit and adjust the mounting hole carefully if required.

How do I keep both main wheels sitting evenly?

Dry fit both sides and measure the insertion depth on the axles so the wheels match. Check the model from the front before glue sets to avoid a tilted stance.

What prep is recommended for resin / 3D printed wheels?

Wash the parts to remove residue, let them dry fully, and apply a thin primer coat before painting.