Heinkel He 111H-3 / H-6 Exterior Panels – Pre-Cut Self-Adhesive Aluminum Foil Set – Real Metal Upgrade (for ICM) Scale 1:48 Metallic Details MDM4830

Metallic Details MDM4830 Aluminum Foil Panel Set includes pre-cut self-adhesive foil panels for the ICM Heinkel He 111H-3 / H-6 kit in 1/48. The unique focus is the surface itself: these real-metal panels let you build a metal-skin look panel-by-panel, with natural tonal variation that is hard to replicate with paint alone.

The He 111H-3 / H-6 airframe has large exterior areas where panel boundaries and surface finish are very noticeable. This set is designed as an exterior upgrade for ICM’s kit parts, without changing the model’s geometry—only the outer “skin” treatment.

For modelers: surface prep matters more than usual. Polish the plastic lightly, remove dust and oils, and apply panels in a planned sequence (centerline sections first, then outward) to avoid trapping edges under your fingers. Burnish each panel from the middle toward the edges, and use a fresh blade to lift and reposition only if needed. Keep foil work separate from heavy sanding steps to prevent scratches.

• Subject: Heinkel He 111H-3 / H-6 exterior panels
• Variant / Family: He 111H-3 / He 111H-6 (kit-dependent)
• Scale: 1/48 (also written as 1:48)
• Product type: Detail Set
• Type of equipment: Aircraft
• Recommended kit: for ICM
• Manufacturer: Metallic Details
• Country of manufacture: Ukraine
• Material: Pre-cut self-adhesive aluminum foil panels
• SKU: MDM4830

This item is part of Metallic Details and belongs to Aftermarket and Exterior Details. For matching projects, browse 1/48 aircraft model kits and all Aircraft Model Kits.

FAQ

Is this set made specifically for the ICM 1/48 kit?

Yes. The foil panels are designed for the ICM Heinkel He 111H-3 / H-6 in 1/48. If you plan to adapt them, compare panel outlines to your kit before applying.

Should I apply foil panels before or after painting?

Apply the foil after main assembly and any sanding that affects exterior seams. Treat foil panels as the surface finish stage, then add smaller external parts afterward where possible.

How can I avoid visible lifted edges?

Burnish from the center outward and keep the surface clean. If an edge lifts, press it down with a smooth tool and avoid repeated repositioning of the same panel.