Lockheed F-104 (F,G) Starfighter Wheels set Scale 1:32 ResKit RS32-0010 for Aircraft Model Kit

ResKit RS32-0010 Wheels Set is a resin / 3D printed wheel upgrade for Lockheed F-104 Starfighter builds in 1/32. On the Starfighter, the wheels sit very close to the airframe lines, so crisp hub faces and clean tire edges can make the landing gear area look more “in scale” after paint and a restrained wash.

This set is intended for F-104 (F,G) family projects where you want sharper wheel definition during finishing and final assembly, especially if you keep the model clean and let the gear detail stand out (kit-dependent).

For modelers: before priming, dry-fit the wheel to the strut/axle and confirm the mounting hole depth. If adjustment is needed, open the hole gradually with a pin vise and re-check often to keep the wheel sitting square.

Product Specifications

• Subject: Lockheed F-104 Starfighter
• Variant / Family: F-104 (F,G)
• Scale: 1/32 (also written as 1:32)
• Product type: Wheels Set
• Type of equipment: Aircraft
• Recommended kit: Any / Universal
• Manufacturer: ResKit
• Country of manufacture: Ukraine
• Material: Resin / 3D Printed
• SKU: RS32-0010

This item is part of ResKit and belongs to Aftermarket. Browse more in ResKit Wheels or compare with Wheels (all brands). For matching projects, see Aircraft Model Kits and 1/32 Aircraft Model Kits.

FAQ

Is this wheels set specific to one kit brand?

Your source listing shows Any / Universal. Even so, mounting and axle geometry can vary between 1/32 F-104 kits, so a dry-fit check before paint is recommended.

What is the safest way to prep resin / 3D printed wheels?

Wash parts to remove residue, let them dry fully, then prime. Keep the mounting face clean so the wheel sits square when installed.

How do I avoid a “toe-in” look after installation?

Test-fit both wheels on the gear legs, then rest the model on a flat surface to confirm symmetry. Make small adjustments before the adhesive fully cures.