Lockheed-Martin F-35B, Jet Nozzels Detailing set (Resin, Photoetch) Scale 1:48 (Recommended for kit: Kitty Hawk) Metallic Details MDR4858 - For Aircraft Model Kits

Metallic Details MDR4858 is a resin and photo-etched detail set for the jet nozzles of the Lockheed Martin F-35B in 1/48, recommended for Kitty Hawk kits. It covers the exhaust/nozzle area, including thin edges and internal features that are visible on a finished model.

The F-35B rear area is often visible on display. This set supports nozzle detailing with mixed-media parts that can represent thin lips and layered features compared to single-piece kit parts (final appearance depends on your build and paint approach).

For modelers: dry-fit the resin nozzle parts into the fuselage opening early and confirm the depth and alignment before paint. Prime lightly, then build metallic finishes in thin layers to avoid softening detail. Add photo-etched parts after the main metallic coats, and handle with tweezers to keep edges straight.

• Subject: Lockheed Martin F-35B
• Variant / Family: F-35B (STOVL) (kit-dependent)
• Scale: 1/48 (also written as 1:48)
• Product type: Detail Set
• Type of equipment: Aircraft
• Recommended kit: for Kitty Hawk
• Service / Subject country: operator-dependent
• Manufacturer: Metallic Details
• Country of manufacture: Ukraine
• Material: Photo-etched metal, resin
• SKU: MDR4858

This item is part of Metallic Details and belongs to Aftermarket. Related upgrade categories include Jet nozzels, Exhaust, and Exterior Details. For matching projects, browse 1/48 aircraft model kits and all Aircraft Model Kits.

FAQ

Is this set intended for a specific kit brand?

Yes. It is recommended for Kitty Hawk 1/48 F-35B kits. Test-fit parts before paint, as tooling and assembly tolerances can vary.

When should I attach the photo-etched parts?

Usually after the main painting is done, so thin metal edges are not covered by primer and metallic coats. Plan the sequence around your finishing steps.

Do nozzle upgrades affect fuselage closure or rear alignment?

They can. Dry-fit the nozzle parts with the rear fuselage sections early to confirm depth and clearance before using adhesive.