Lockheed U-2A, Painting Masks Scale 1:48 (Recommended for kit: AFV Club) Metallic Details MDM4820 - For Model Aircraft Kits

Metallic Details MDM4820 is a set of self-adhesive painting masks for the Lockheed U-2A in 1/48, recommended for the AFV Club kit. The masks are designed to simplify clear-part work by keeping canopy frame edges consistent and reducing time spent cutting tape for long, straight runs.

The U-2A has prominent glazing that sits high on the fuselage and stays very visible on an otherwise clean airframe. Pre-cut masks help maintain even frame widths and crisp corners so the canopy area doesn’t distract from the overall finish.

For modelers: polish and degrease the clear parts first, then place masks from the center outward to avoid stretching. Burnish edges along the frame lines, and seal tight corners with a light pass of clear varnish before the main color if you’re worried about bleed. Remove masks by lifting a corner with a toothpick and pulling back on itself at a low angle.

• Subject: Lockheed U-2A
• Variant / Family: U-2A
• Scale: 1/48 (also written as 1:48)
• Product type: Painting Masks
• Type of equipment: Aircraft
• Recommended kit: for AFV Club
• Manufacturer: Metallic Details
• Country of manufacture: Ukraine
• Material: Masking material (paper)
• SKU: MDM4820

FAQ

What do these masks help with most?

They help keep canopy framing consistent and save time compared with cutting tape for each panel.

How do I avoid paint bleed under the mask edges?

Burnish edges firmly and spray several light coats instead of one heavy coat. If needed, a thin clear coat along the edges can help seal them before the main color.

When should I remove the masks?

Remove them after the paint has fully cured so edges are less likely to lift or smear. Pull the mask back on itself at a low angle for a cleaner edge.

This item is part of Metallic Details and belongs to Aftermarket and Painting Masks. For matching builds, browse 1/48 aircraft model kits and all Aircraft Model Kits.