M197 Gatling Gun (for ICM) Scale 1:32 Metallic Details MDR3224

Metallic Details MDR3224 is a 3D Printed Set for detailing the M197 Gatling Gun in 1/32, designed for the ICM AH-1 Cobra helicopter kit. It covers the gun assembly, including barrel and housing shapes visible on an open-mounted installation.

Rotary cannon parts can appear simplified if barrel ends and housings are molded with limited definition. 3D-printed parts provide defined muzzle and body geometry that remains visible after primer and metallic finishing.

The M197 electric cannon is a 20 mm three-barreled rotary cannon used on platforms such as the AH-1 Cobra (as noted by the manufacturer). This set represents the gun component for a helicopter build and does not include the aircraft kit.

For modelers: dry-fit the gun to the kit mount early to confirm alignment and clearance with the nose/turret area. Prime lightly to preserve small edges, paint the gun as a separate sub-assembly, and install it later in the build to reduce handling damage. If the mounting joint is small, a short wire pin can be used for additional support.

• Subject: M197 Gatling Gun
• Variant / Family: M197 rotary cannon
• Scale: 1/32 (also written as 1:32)
• Product type: 3D Printed Set
• Type of equipment: Helicopter
• Recommended kit: for ICM (AH-1 Cobra, 1/32)
• Service / Subject country: subject- and operator-dependent
• Manufacturer: Metallic Details
• Country of manufacture: Ukraine
• Material: 3D-printed resin
• SKU: MDR3224

This item is part of Metallic Details and belongs to Aftermarket and Arms and Weapons. For related helicopter items, see Helicopter Model Kits and Helicopter Model Kits Scale 1/32, plus cockpit items in Cockpit & Cargo Bay.

FAQ

Which kit is this set designed for?

The set is specified for the ICM 1/32 AH-1 Cobra helicopter kit.

Is this a complete turret or only the gun?

The set is described as detailing the M197 Gatling Gun. It does not include the helicopter kit, and other turret components depend on your kit parts.

What is the safest way to attach a small gun part in 1/32?

Test-fit the mount first, then use a small pin (wire) if needed to strengthen the joint. Install the painted gun later in the build to reduce the risk of damaging thin details.