M230 Chain Gun (for Hasegawa, Academy) Scale 1:48 Metallic Details MDR4883

Metallic Details MDR4883 includes 3D-printed parts for detailing the M230 Chain Gun on AH-64 helicopter builds in 1/48. This set is focused on refining a small but very visible area on the finished model: the gun assembly under the nose.

On AH-64 kits, the gun installation sits in a spot that draws attention during handling and display. Replacing or refining this part can help keep the front-end details looking crisp without adding complexity to the rest of the airframe.

For modelers: remove the kit gun carefully and test-fit the new parts against the turret opening and mounting points before glue. Keep the barrel axis straight while the adhesive cures, and check clearance with nearby panels or fairings. Prime the parts before painting to preserve fine edges and avoid filling small details.

• Subject: M230 Chain Gun (for AH-64)
• Scale: 1/48 (also written as 1:48)
• Product type: 3D Printed Set
• Type of equipment: Helicopter
• Recommended kit: for Hasegawa, Academy
• Manufacturer: Metallic Details
• Country of manufacture: Ukraine
• Material: 3D-printed parts
• SKU: MDR4883

This item is part of Metallic Details and belongs to Aftermarket and Weapons. For compatible builds, browse 1/48 helicopter model kits and all Helicopter Model Kits.

FAQ

Is this set suitable for any 1/48 AH-64 variant?

The set is intended for 1/48 AH-64 kits from Hasegawa and Academy. Variant details can differ by boxing, so compare the kit gun area with your planned configuration before installation.

Do I need to modify the kit mounting points?

Minor adjustment can be needed depending on kit tolerances. Test-fit first, then refine the mounting surface or opening gradually to avoid changing the gun alignment.

What is a practical painting approach for this part?

Prime first, then apply thin coats to keep edges sharp. If you weather the area, add it after the base coat so small shapes remain readable.