Mark 4 20mm gun pod (OV-10A, F-8 , F-4 (USN), A-4, A-6A) (1 pcs) (3D Printed) Scale 1:48 ResKit RS48-0485 for Aircraft Model Kit

ResKit RS48-0485 is a 3D printed 1/48 Mark 4 20mm gun pod set (1 pc) for aircraft model loadouts. A gun pod is typically a centerline focal point, and this part is intended to provide cleaner contours and sharper surface detail than many kit-supplied options, especially around panel lines and the pod body profile.

Aftermarket resin accessory designed for aircraft scale model kits.

Highly detailed resin parts intended for accurate 1/48 scale aircraft models.

This upgrade is useful when kit pods look simplified or when you want a consistent, crisp look for a prominent under-fuselage store. Because centerline pylons and mounting points vary between aircraft types and kit toolings, installation should be treated as kit-dependent even with an Any / Universal recommendation.

For modelers: dry-fit the pod to the intended pylon first and check alignment from front and side views before glue cures. Prime early with a thin coat to reveal small support marks, and confirm clearance with adjacent stores if you are building a multi-store configuration.

Compatible aircraft

• North American OV-10 Bronco
• Vought F-8 Crusader
• McDonnell Douglas F-4 Phantom II
• Douglas A-4 Skyhawk
• Grumman A-6 Intruder
• Grumman EA-6 Prowler

Product Specifications

• Subject: Mark 4 20mm gun pod (1 pc)
• Scale: 1/48 (also written as 1:48)
• Product type: Weapons Set
• Type of equipment: Aircraft
• Recommended kit: Any / Universal (kit-dependent pylons and mounting)
• Service / Subject country: USA
• Manufacturer: ResKit
• Country of manufacture: Ukraine
• Material: Resin / 3D Printed
• SKU: RS48-0485

This item is part of ResKit and belongs to Aftermarket. Browse more in ResKit Arms and Weapons or compare with Arms and Weapons (all brands). For matching builds, see Aircraft Model Kits and 1/48 Aircraft Model Kits.

FAQ

Will this gun pod fit any 1/48 kit?

The set is Any / Universal, but centerline pylons and mounting slots vary by aircraft and kit tooling. Dry-fit first and adjust only the hidden contact areas if required.

How can I keep the pod aligned straight under the fuselage?

Check alignment from front and side views before glue cures. Small adjustments at the mounting face help keep the pod parallel to the aircraft centerline.

Any tips for finishing a 3D printed pod?

Remove supports gradually and prime early with a thin coat to reveal small attachment marks. Keeping primer and paint coats light helps preserve fine panel line detail.