MBD3-U6-68 multiple bombs racks (2 pcs) (Su-17, Su-24, Su-27, Su-30) (3D Printed) Scale 1:48 ResKit RS48-0556

ResKit RS48-0556 is a 3D printed set of MBD3-U6-68 multiple bombs racks (2 pcs) for 1/48 aircraft builds. These racks add the busy, structural look under the wing with sharper edges and cleaner slot/detail definition, which is hard to keep crisp on many kit-supplied multi-store racks.

Aftermarket resin accessory designed for aircraft scale model kits.

Highly detailed resin parts intended for accurate 1/48 scale aircraft models.

They are useful when your project features visible pylons and external stores, because the rack itself becomes a focal point: the spacing, braces, and mounting faces are clearly seen even on a finished model.

For modelers: treat the rack as a fit-critical part. Test-fit to the wing/pylon first, then test-fit the stores to the rack to confirm spacing and parallel alignment. If needed, pin the rack to the pylon with thin wire for a stronger joint, and prime lightly to preserve printed edges.

Compatible aircraft

• Su-17/22 Fitter,
• Su-24 Fencer,
• Su-27 Flanker,
• Su-30 Flanker

Product Specifications

• Subject: MBD3-U6-68 multiple bombs racks (2 pcs)
• Scale: 1/48 (also written as 1:48)
• Product type: Pylons / Bomb Racks
• Type of equipment: Aircraft
• Recommended kit: Any / Universal
• Manufacturer: ResKit
• Country of manufacture: Ukraine
• Subject country: Ukraine/USSR
• Material: Resin / 3D Printed
• SKU: RS48-0556

This item is part of ResKit and belongs to Aftermarket. Browse more in ResKit Pylons / Bomb Racks or compare with Pylons / Bomb Racks (all brands). For matching builds, see Aircraft Model Kits and 1/48 Aircraft Model Kits.

FAQ decision: Included because this is a 3D printed rack set where compatibility and store spacing are kit-dependent and alignment guidance adds practical value.

FAQ

Will these racks fit any 1/48 Su-family kit?

They are listed as Any / Universal, but mounting faces and pylon geometry vary by kit. Test-fit to your wing/pylon and adjust attachment points as needed.

How can I keep the stores aligned and parallel?

Dry-fit the stores on the rack before painting, and use a simple jig or ruler edge to check that the outer faces sit level. Glue in stages so parts do not shift.

Is pinning worth doing on racks?

Pinning can help if the kit has shallow attachment points or if you are adding multiple stores. A thin wire pin improves strength and keeps alignment stable.