McDonnell Douglas F-4 Phantom II (J/S), Landing Gears, Wheels (for Hasegawa) Scale 1:48 Metallic Details MDR48250

Metallic Details MDR48250 is a 3D-printed landing gear and wheels detailing set for the McDonnell Douglas F-4 Phantom II (J/S) in 1/48, recommended for the Hasegawa kit. Landing gear is a high-visibility area on the Phantom—this set is intended to sharpen strut shapes and wheel definition where kit parts can look soft once painted and washed.

This is an upgrade set only (the aircraft model kit is not included). Use it as a dedicated subassembly to improve stance and detail without changing the overall build plan.

The F-4 Phantom II is a twin-engine, two-seat aircraft with many kit variants and configuration differences. Treat small fit points and door/leg alignment as version- and kit-dependent, and match the parts to your chosen J/S build and references.

For modelers: dry-fit the main legs and wheels early and check the model’s “sit” on a flat surface before glue. Keep both main legs aligned at the same angle (front and side views) to avoid a twisted stance. If you prefer extra strength, consider pinning the legs with thin wire where the kit design allows, then paint and weather the gear before final installation to reduce handling.

• Subject: McDonnell Douglas F-4 Phantom II (J/S)
• Variant / Family: F-4 Phantom II family (J/S application)
• Scale: 1/48 (also written as 1:48)
• Product type: Landing Gear Set
• Type of equipment: Aircraft
• Recommended kit: for Hasegawa
• Service / Subject country: multiple operators (country/era dependent)
• Manufacturer: Metallic Details
• Country of manufacture: Ukraine
• Material: 3D-printed resin
• SKU: MDR48250

FAQ

Is this set intended for the Hasegawa 1/48 F-4 Phantom II (J/S)?

Yes. MDR48250 is listed for the Hasegawa kit and targets landing gear and wheels for a 1/48 F-4 Phantom II (J/S) build.

Can I use it with other 1/48 F-4 kits?

The set is recommended for Hasegawa. Other kits can differ in mounting points and gear bay geometry, so fit would need to be checked and may require adjustments.

What’s a practical way to keep all wheels level?

Use a flat surface as a jig: tack the gear in place, set the model down carefully, and adjust while the bond is still workable. Re-check alignment from the front and rear before it fully sets.

This item is part of Metallic Details and belongs to Aftermarket and Landing Gear. For related parts, see Wheels, plus 1/48 aircraft model kits and Aircraft Model Kits.