Messerschmitt Me.262 type 1 Wheels set Scale 1:48 ResKit RS48-0204 for Aircraft Model Kit

ResKit RS48-0204 is a 1/48 Wheels Set for the Messerschmitt Me.262 (type 1). The set is intended to improve the look of the landing gear with cleaner hub definition and a more precise tire profile, which stands out on the Me.262 because the wheels sit in open, easy-to-see bays.

This upgrade is helpful when kit wheels look soft around the hub face or when rim-to-tire separation is hard to keep crisp after paint. As different kits use different axle stubs and mounting depth, final fit should be treated as kit-dependent.

For modelers: dry-fit on the landing gear stubs before priming to confirm depth and alignment. If a small correction is needed, sand only the hidden mounting face and re-check the model on a flat surface to keep the stance even.

Product Specifications

• Subject: Messerschmitt Me.262 type 1 wheels set
• Scale: 1/48 (also written as 1:48)
• Product type: Wheels Set
• Type of equipment: Aircraft
• Recommended kit: Any / Universal (kit-dependent mounting)
• Service / Subject country: Germany (WW2)
• Manufacturer: ResKit
• Country of manufacture: Ukraine
• Material: Resin / 3D Printed
• SKU: RS48-0204

This item is part of ResKit and belongs to Aftermarket. Browse more in ResKit Wheels or compare with Wheels (all brands). For matching builds, see Aircraft Model Kits and 1/48 Aircraft Model Kits.

FAQ

Will these wheels fit any 1/48 Me.262 kit?

The set is Any / Universal, but axle diameter and mounting depth vary by kit brand and tooling. Dry-fit first and adjust only the hidden contact surface if required.

Do resin/3D printed wheels need special preparation?

Wash parts before priming and remove any small support marks carefully. A light primer coat helps reveal minor imperfections before painting tires and hubs.

How can I keep the aircraft sitting level after installing replacement wheels?

Test-fit both main wheels at the same time and check the model on a flat surface before glue cures. Small adjustments at the mounting face usually correct alignment.