Meteor BVRAAM Missiles (4 pcs) (Rafale, Mirage 2000, JAS-39 Gripen, Eurofighter Typhoon, F-35) (3D Printed) Scale 1:32 ResKit RS32-0460 for Aircraft Model Kit

ResKit RS32-0460 is a 3D printed set of Meteor BVRAAM missiles (4 pcs) for 1/32 aircraft builds. The set is aimed at crisp fin edges and consistent body symmetry, helping keep all four rounds uniform on the finished loadout.

Meteor is carried on several modern fighters, so this set is useful when you want a clean, repeatable missile shape for display-ready underwing stations (fit and mounting are kit-dependent).

For modelers: plan your mounting points before paint—test-fit to the pylon/rail, mark the contact spots, then drill tiny guide holes if your kit uses pins; after priming, keep fin trailing edges free of paint buildup to preserve the sharp printed profile.

Compatible aircraft

• Dassault Rafale
• Dassault Mirage 2000
• Saab JAS 39 Gripen
• Eurofighter Typhoon
• Lockheed Martin F-35 Lightning II

Product Specifications

• Subject: Meteor BVRAAM missiles (4 pcs)
• Scale: 1/32 (also written as 1:32)
• Product type: Weapons Set / Arms and Weapons
• Type of equipment: Aircraft
• Recommended kit: Any / Universal - for compatible 1/32 kits (kit-dependent)
• Service / Subject country: European Union
• Manufacturer: ResKit
• Country of manufacture: Ukraine
• Material: Resin / 3D Printed
• SKU: RS32-0460

This item is part of ResKit and belongs to Aftermarket. Browse more in ResKit Arms and Weapons or compare with Arms and Weapons (all brands). For matching builds, see Aircraft Model Kits and 1/32 Aircraft Model Kits.

FAQ

Do these missiles include pylons or launch rails?

The set is described as missiles only (4 pcs). Pylons/rails are typically taken from the kit or a separate aftermarket set (kit-dependent).

How do I confirm fit on my kit?

Dry-fit to your specific pylon/rail and check contact points before paint. Small differences in rail geometry between kits can affect alignment.

What is the safest way to handle 3D printed parts?

Remove any supports in small steps, then lightly sand the attachment points. Wash parts before priming to help paint adhesion.

Any painting tip to keep the fins sharp?

Use lighter coats around fin edges and trailing surfaces to avoid softening the printed detail under thick paint layers.