MiG-29 SMT Wheels set Scale 1:48 ResKit RS48-0090 for Aircraft Model Kit

ResKit RS48-0090 is a 1/48 MiG-29 SMT wheels set, produced in 3D printed resin to keep the hub pattern crisp and the tire profile consistent across the set. On a Fulcrum-family build, the landing gear area is busy and exposed, so clean wheel detail helps the underside look sharper without needing heavy washes.

Wheels also affect how the model sits and how convincing the gear legs look once installed. A replacement set can improve hub depth and rim definition if the kit wheels are simplified or have soft detail that disappears under primer.

For modelers: test-fit the wheels to your kit axles early and confirm brake detail orientation. Use a thin primer coat, paint hubs first, then mask for the tires; keep the final finish controlled so the recessed hub detail stays readable at 1/48.

Product Specifications

• Subject: MiG-29 SMT
• Scale: 1/48 (also written as 1:48)
• Product type: Wheels Set
• Type of equipment: Aircraft
• Recommended kit: Any / Universal
• Service / Subject country: Ukraine / USSR
• Manufacturer: ResKit
• Country of manufacture: Ukraine
• Material: Resin / 3D Printed
• SKU: RS48-0090

This item is part of ResKit and belongs to Aftermarket. Browse more in ResKit Wheels or compare with Wheels (all brands). For matching builds, see Aircraft Model Kits and 1/48 Aircraft Model Kits.

FAQ

Will this wheels set fit any 1/48 MiG-29 kit?

The set is listed as Any / Universal for 1/48 MiG-29 builds, but axle diameter and wheel well clearance can be kit-dependent. Test-fit before final assembly.

How should I prepare 3D printed resin wheels before painting?

Wash the parts, let them dry fully, then apply a light primer coat. This preserves hub recesses and supports even paint coverage.

How can I keep the hub detail visible after weathering?

Use a thin wash and remove excess from the hub face, then finish with restrained dry-brushing. Avoid heavy layers that can fill the recessed pattern.