Mikoyan MiG-17PF, Exterior Details (Painting Masks, 3D-Printed, Photoetch) Scale 1:48 (Recommended for kit: HobbyBoss) Metallic Details MDM4805 - For Aircraft Models Kits

Metallic Details MDM4805 is a mixed-media exterior detail set for the Mikoyan MiG-17PF in 1/48, recommended for the HobbyBoss kit. The key advantage of this set is the combination of three materials—photo-etch for thin edges, 3D-printed parts for small shapes, and self-adhesive masks for clean paint boundaries on exterior areas.

This is an upgrade set only (the aircraft model kit is not included). Use it to refine external features while keeping your chosen airframe configuration consistent with the base kit.

The MiG-17PF is a radar-equipped variant within the MiG-17 family. External details can differ by airframe and finish choice, so treat placement and small fittings as reference- and version-dependent for your specific build.

For modelers: plan the workflow around surfaces: do major assembly and sanding first, then test-fit the 3D-printed parts and photo-etch before primer. Apply masks after priming (and after any raised parts that would block mask adhesion). For photo-etch on curved panels, dry-fit and tack one end first, align, then secure the rest in short sections to keep edges straight.

• Subject: Mikoyan MiG-17PF
• Variant / Family: MiG-17 family (PF variant)
• Scale: 1/48 (also written as 1:48)
• Product type: Detail Set
• Type of equipment: Aircraft
• Recommended kit: for HobbyBoss
• Service / Subject country: multiple operators (country/era dependent)
• Manufacturer: Metallic Details
• Country of manufacture: Ukraine
• Material: Photo-etched metal, 3D-printed resin, self-adhesive mask material
• SKU: MDM4805

FAQ

Is MDM4805 intended for the HobbyBoss MiG-17PF kit?

Yes. This set is listed as recommended for HobbyBoss and targets exterior detailing for a 1/48 MiG-17PF build.

What is a practical order for using photo-etch, 3D-printed parts, and masks?

Test-fit and install 3D-printed parts and photo-etch before primer where possible, then prime to unify surfaces. Apply painting masks after primer and before final color coats, once the surface is clean and fully cured.

How do I keep self-adhesive masks from lifting on panel lines and rivets?

Burnish the mask edges gently with a cotton swab and spray light coats first to seal the edge. Avoid heavy wet coats early, and remove masks once the paint has set but before it fully hardens for cleaner edges.

This item is part of Metallic Details and belongs to Aftermarket and Exterior Details. For related supplies, see Painting Masks, plus 1/48 aircraft model kits and Aircraft Model Kits.