Mk-54 Depth bombs (350 lb) (4 pcs) (PB4Y-1, PB4Y-2, PBY/PBN, PB2Y, SB2C, SOC, SO3C, SC, SBD, JRF, J4F, TBF/TBM, PV-1, PV-2, PBM, PBJ, OS2U, SB2U) (3D Printed) Scale 1:48 ResKit RS48-0573

ResKit RS48-0573 is a 3D printed Mk-54 Depth bombs (350 lb) Weapons Set (4 pcs) for 1/48 aircraft builds. The set is aimed at clean cylindrical profiles and consistent tail detail, so a full rack or pair of stores looks uniform once painted.

Aftermarket resin accessory designed for aircraft scale model kits.

Highly detailed resin parts intended for accurate 1/48 scale aircraft models.

These stores are a good fit for builds where underwing or external loads are prominent, especially on patrol and carrier aircraft where the shape and alignment of small munitions are easy to spot on a finished model.

For modelers: keep the four parts as a matched batch during prep and priming so surface finish stays consistent. Dry-fit to your rack or pylon first, then set alignment from the tail end to ensure all four sit parallel at the same angle.

Compatible aircraft

• B-24 Liberator,
• PBY Catalina,
• SB2C Helldiver,
• SO3C Seamew,
• SBD Dauntless,
• TBF Avenger,
• PV Ventura,
• PBM Mariner,
• B-25 Mitchell,
• OS2U Kingfisher,
• SB2U Vindicator

Product Specifications

• Subject: Mk-54 Depth bombs (350 lb) (4 pcs)
• Scale: 1/48 (also written as 1:48)
• Product type: Weapons Set
• Type of equipment: Aircraft
• Recommended kit: Any / Universal
• Manufacturer: ResKit
• Country of manufacture: Ukraine
• Subject country: USA (WW2), United Kingdom (WW2), Japan (WW2), Germany (WW2), Italy (WW2)
• Material: Resin / 3D Printed
• SKU: RS48-0573

This item is part of ResKit and belongs to Aftermarket. Browse more in ResKit Arms and Weapons or compare with Arms and Weapons (all brands). For matching builds, see Aircraft Model Kits and 1/48 Aircraft Model Kits.

FAQ decision: Included because this is a 3D printed weapons set where mounting is kit-dependent and the compatibility list is broad, so fit/alignment guidance adds real value.

FAQ

Will these stores fit any 1/48 kit?

They are listed as Any / Universal, but rack and pylon interfaces vary by kit. Test-fit to your chosen rack/pylon and adjust attachment points as needed.

How do I keep all four bombs aligned the same way?

Dry-fit all four in place before glue sets, then view from front and rear to confirm they sit parallel and at the same angle.

What prep works well for 3D printed parts before painting?

Wash parts, remove any remaining print contact points carefully, then use a light primer coat to keep edges and small detail crisp.