Mk.84 with BSU-36/B Bombs (2 pcs) (F-15E, F-16, F-111F, AV-8B, F/A-18D) (3D Printed) Scale 1:48 ResKit RS48-0524 for Aircraft Model Kit

ResKit RS48-0524 is a 3D printed set of Mk.84 with BSU-36/B bombs in 1/48, supplied as 2 pcs for aircraft model builds. The key visual gain here is the BSU-36/B tail unit: its fins and rear profile are prominent on a finished model, and crisp 3D printed edges help the assembly read as a separate component rather than a softened kit part.

Aftermarket resin accessory designed for aircraft scale model kits.

Highly detailed resin parts intended for accurate 1/48 scale aircraft models.

This set works well for projects where the stores are a focal point under the wings or centerline, especially on builds with clean paintwork where minor shape inaccuracies stand out quickly.

For modelers: before glue-up, square the bomb seam line and tail mating face with a few passes on fine sandpaper. If you are adding sway braces or lugs from your kit, align both bombs using the same jig or ruler so their fins sit parallel when viewed from the rear.

Compatible aircraft

• McDonnell Douglas F-15E Strike Eagle
• General Dynamics F-16 Fighting Falcon
• General Dynamics F-111 Aardvark
• Harrier
• McDonnell Douglas F/A-18 Hornet

Product Specifications

• Subject: Mk.84 with BSU-36/B Bombs (2 pcs)
• Scale: 1/48 (also written as 1:48)
• Product type: Weapons Set
• Type of equipment: Aircraft
• Recommended kit: Any / Universal
• Manufacturer: ResKit
• Country of manufacture: Ukraine
• Material: Resin / 3D Printed
• SKU: RS48-0524

This item is part of ResKit and belongs to Aftermarket. Browse more in ResKit Arms and Weapons or compare with Arms and Weapons (all brands). For matching builds, see Aircraft Model Kits and 1/48 Aircraft Model Kits.

FAQ

Is this set universal for any 1/48 kit?

It is listed as Any / Universal, but racks and mounting lugs can be kit-dependent. Dry-fit to your pylons/launchers and adjust the contact surface if needed.

What is the easiest way to keep the tail fins straight?

Use a flat surface as a reference while the glue cures and check the rear view for symmetry. Small alignment differences are very noticeable on BSU-style tails.

How should I prep 3D printed resin before painting?

Wash parts to remove residue, let them dry fully, then apply a primer suitable for resin. Keep sanding light around fin edges to preserve sharp detail.