Mk-XVII Depth bombs (350 lb) (4 pcs) (PB4Y-1, PB4Y-2, PBY/PBN, PB2Y, SB2C, SOC, SO3C, SC, SBD, JRF, J4F, TBF/TBM, PV-1, PV-2, PBM, PBJ, OS2U, SB2U ) (3D Printed) Scale 1:48 ResKit RS48-0571

ResKit RS48-0571 includes four Mk-XVII depth bombs (350 lb) for 1/48 aircraft builds. The 3D printed parts keep the body shape and tail details consistent across all four stores, which is useful when you mount a matched pair or a full set under racks.

Aftermarket resin accessory designed for aircraft scale model kits.

Highly detailed resin parts intended for accurate 1/48 scale aircraft models.

This set helps on maritime or patrol-style aircraft projects where the kit ordnance can look simplified. Mounting lugs, racks, and spacing vary between kits, so fit and placement are kit-dependent.

For modelers: dry fit each bomb to your rack and check clearance to doors, floats, or pylons before painting. Remove supports carefully, wash the parts, and apply thin primer so the tail details stay sharp. If your rack has shallow contact points, pinning can improve strength.

Compatible aircraft

• B-24 Liberator,
• PBY Catalina,
• SB2C Helldiver,
• SO3C Seamew,
• SBD Dauntless,
• TBF Avenger,
• PV Ventura,
• PBM Mariner,
• B-25 Mitchell,
• OS2U Kingfisher,
• SB2U Vindicator

Product Specifications

• Subject: Mk-XVII Depth bombs (350 lb) (4 pcs)
• Scale: 1/48 (also written as 1:48)
• Product type: Arms and Weapons
• Type of equipment: Aircraft
• Recommended kit: Any / Universal
• Subject country: USA (WW2), United Kingdom (WW2), Japan (WW2), Germany (WW2), Italy (WW2)
• Manufacturer: ResKit
• Country of manufacture: Ukraine
• Material: Resin / 3D Printed
• SKU: RS48-0571

This item is part of ResKit and belongs to Aftermarket. Browse more in ResKit Arms and Weapons or compare with Arms and Weapons (all brands). For matching builds, see Aircraft Model Kits and 1/48 Aircraft Model Kits.

FAQ

Will these depth bombs fit any 1/48 aircraft kit?

The set is listed as Any / Universal for compatible 1/48 aircraft, but racks and attachment points differ between kits. Dry fit to confirm spacing and alignment.

How do I attach ordnance securely to racks?

If the contact area is small, drill a shallow hole and add a short pin. This improves strength and helps keep the stores aligned.

What prep steps are recommended for 3D printed parts?

Remove supports carefully, wash to remove residue, let dry fully, and apply a thin primer coat before painting.