Pilot seats for Sikorsky UH-60, SH-60, MH-60 early Scale 1:35 Metallic Details MDR3527

Metallic Details MDR3527 is a 3D-printed pilot seat set for early versions of the UH-60, SH-60, and MH-60 in 1/35 scale. The set includes two seats, aimed at improving seat frame definition in the area that remains visible through the cockpit glazing.

On S-70 family kits, the seat silhouette and side-frame thickness can stand out once the cockpit is painted. This set helps keep both seats consistent so the front cabin reads as a matched pair.

Early configurations can differ in seat mounting points and surrounding cockpit fittings depending on the kit and variant. Use dry-fitting to confirm the seat position relative to the floor and center console before final assembly.

For modelers: test-fit both seats at the same time and check height and rake from the side view so the pair sits evenly. If your kit uses shallow locating tabs, add a small styrene shim or pin to strengthen the joint. Paint seats as subassemblies, then install them after cockpit weathering to keep side frames and edges clean.

Product specifications

• Subject: Pilot seats for UH-60 / SH-60 / MH-60 (early)
• Variant / Family: S-70 family; early versions (kit-dependent)
• Scale: 1/35 (also written as 1:35)
• Product type: 3D Printed Set
• Type of equipment: Helicopter
• Recommended kit: for Any / Universal 1/35 UH-60 / SH-60 / MH-60 kits
• Manufacturer: Metallic Details
• Country of manufacture: Ukraine
• Material: Resin (3D-printed)
• SKU: MDR3527

This item is part of Metallic Details and belongs to Aftermarket and Interior Details. For matching projects, browse 1/35 helicopter model kits and all Helicopter Model Kits.

FAQ

How do I confirm my build matches the “early” seat style?

Compare your kit’s seat frames and headrest area to reference photos for the specific UH-60/SH-60/MH-60 configuration you are modeling. Seat layout details can vary by variant and kit tooling.

Will these seats fit any 1/35 kit?

The set is intended as a universal cockpit upgrade for 1/35 UH-60/SH-60/MH-60 builds. Dry-fit first and be ready for small shims or adjustments depending on the kit’s cockpit floor and locating points.

When should I install the seats during the build?

Test-fit early to confirm positioning, but glue them after cockpit painting and weathering. This reduces touch-ups and helps keep side frames crisp.