R-60M (AA-8 Aphid) Missiles (4 pcs) (MiG-21, MiG-23, MiG-25, MiG-29, MiG-31, Su-17, Su-24, Su-25, Yak-38) (3D printing) Scale 1:48 ResKit RS48-0405 for Aircraft Model Kit

ResKit RS48-0405 is a 1/48 R-60M (AA-8 Aphid) missiles set with 4 pieces, produced in 3D printed resin for consistent body shape and crisp fin edges. In 1/48, small missiles quickly show softness on fins and noses once paint is applied, so a set with clean, even geometry helps the loadout look sharper and more uniform.

The R-60M is typically carried in pairs, which makes symmetry important: mismatched fin angles or uneven lengths become obvious when mounted on opposite stations. Replacing kit missiles can help keep the outer stations tidy and reduce the need for sanding delicate fins.

For modelers: dry-fit each missile to your rails and check alignment from front and rear views before paint. Prime lightly to preserve edges, paint missiles separately, then attach at the end using a simple spacing guide so all four sit at the same angle.

Compatible aircraft

• Mikoyan-Gurevich MiG-21 Fishbed
• Mikoyan-Gurevich MiG-23 Flogger
• Mikoyan-Gurevich MiG-25 Foxbat
• Mikoyan-Gurevich MiG-29 Fulcrum
• Mikoyan-Gurevich MiG-31 Foxhound
• Sukhoi Su-17/22 Fitter
• Sukhoi Su-24 Fencer
• Sukhoi Su-25 Frogfoot
• Yakovlev Yak-38 Forge

Product Specifications

• Subject: R-60M (AA-8 Aphid) Missiles (4 pcs)
• Scale: 1/48 (also written as 1:48)
• Product type: Weapons Set
• Type of equipment: Aircraft
• Recommended kit: Any / Universal
• Service / Subject country: Ukraine / USSR
• Manufacturer: ResKit
• Country of manufacture: Ukraine
• Material: Resin / 3D Printed
• SKU: RS48-0405

This item is part of ResKit and belongs to Aftermarket. Browse more in ResKit Arms and Weapons or compare with Arms and Weapons (all brands). For matching builds, see Aircraft Model Kits and 1/48 Aircraft Model Kits.

FAQ

Will these missiles fit any 1/48 kit that can carry R-60M?

The set is listed as Any / Universal, but launcher rail interfaces can be kit-dependent. Dry-fit to your kit rails and adjust the contact area as needed.

How should I prepare 3D printed resin missiles before painting?

Wash the parts thoroughly, allow them to dry completely, then apply a thin primer coat. This improves paint adhesion while keeping fin edges crisp.

How can I keep all four missiles aligned consistently on the model?

Install missiles after the main painting is complete and check alignment from front and rear views. Using a simple ruler or straight edge as a guide helps keep angles consistent.