Republic F-105 Thunderchief outboard Pylon (AERO-3B) for AIM-9B (3D Printing) Scale 1:48 ResKit RS48-0427 for Aircraft Model Kit

ResKit RS48-0427 is a Pylons / Bomb Racks set for the Republic F-105 Thunderchief in 1/48, providing the outboard pylon AERO-3B configured for AIM-9B. The key benefit is cleaner pylon geometry and sharper small details around the rail interface, which helps the outboard station look more precise on a finished model.

This upgrade is most useful when the outboard pylons are a visual focal point and you want a tidy, straight store presentation without reworking the wing. Exact mounting points and wing pylon interfaces vary between kit toolings, so final fit is kit-dependent.

For modelers: dry-fit early and keep the pylon oriented correctly (set it in the direction of flight, FWD). Remove 3D print supports with a fine saw, then lightly sand contact points and test alignment from the front to avoid a visible tilt.

Product Specifications

• Subject: Republic F-105 Thunderchief outboard pylon (AERO-3B) for AIM-9B
• Scale: 1/48 (also written as 1:48)
• Product type: Pylons / Bomb Racks
• Type of equipment: Aircraft
• Recommended kit: Any / Universal (kit-dependent)
• Manufacturer: ResKit
• Country of manufacture: Ukraine
• Material: Resin / 3D Printed
• SKU: RS48-0427

This item is part of ResKit and belongs to Aftermarket. Browse more in ResKit Pylons / Bomb Racks or compare with Pylons / Bomb Racks (all brands). For matching builds, see Aircraft Model Kits and 1/48 Aircraft Model Kits.

FAQ

Will this fit any 1/48 F-105 kit?

It is intended for 1/48 F-105 builds, but wing mounting points and pylon interfaces vary by tooling. Dry-fit first and treat final installation as kit-dependent.

How do I avoid a tilted pylon?

Test-fit and check alignment from the front before glue. Adjust the contact surface gradually and keep the pylon centered to the wing reference line.

What is the safest way to remove 3D printed supports?

Use a fine saw to separate supports, then refine contact points with light sanding. Priming early helps reveal any remaining support marks before paint.