Rockwell B-1 B Lancer, Air Intakes Detailing set (Resin) Scale 1:72 Metallic Details MDR7237 - For Model Kit Aircraft

Metallic Details MDR7237 is a resin air intake detailing set for the Rockwell B-1B Lancer in 1/72. The set includes 10 resin parts and is aimed at the intake area where smooth lips and consistent trunk geometry are very noticeable during dry-fitting and after painting.

This is an aftermarket upgrade set only; the aircraft kit is not included. The set provides two assembly options (option selection is build-dependent).

The B-1B intake openings are prominent on the fuselage sides and tend to highlight seam lines and step mismatches. Upgrading this area helps keep the intake edges even and improves how the model reads from front-quarter angles.

For modelers: choose your assembly option early, then test-fit the intake parts against the kit fuselage to confirm the contact surfaces. Paint the trunk interiors before final installation and protect the intake lips with masking while you work on surrounding seams. If you need minor adjustments, sand the mating edges in small passes and re-check symmetry on left/right sides before glue sets.

• Subject: Rockwell B-1B Lancer air intakes
• Variant / Family: B-1B Lancer (kit-dependent)
• Scale: 1/72 (also written as 1:72)
• Product type: Resin set
• Type of equipment: Aircraft
• Recommended kit: for Any / Universal 1/72 B-1B kits (fit is kit-dependent)
• Manufacturer: Metallic Details
• Country of manufacture: Ukraine
• Material: Resin parts
• SKU: MDR7237

This item is part of Metallic Details and belongs to Aftermarket and Exterior Details. For matching projects, browse 1/72 aircraft model kits and all Aircraft Model Kits.

FAQ

What do “two assembly options” mean for this set?

The set provides two build paths for the intake parts. Dry-fit both options against your kit parts and choose the one that matches your planned configuration and alignment.

Will this set fit every 1/72 B-1B kit?

It is listed as Any / Universal, but fit can vary by tooling. Compare the intake opening shape and the available internal depth before final installation.

How can I avoid visible seams inside the intakes?

Paint the intake interiors before assembly when possible, and address any joins with light sanding and spot-priming. Mask the intake lips so exterior seam work does not scuff the finished inner surfaces.