SR-71 Blackbird, Landing gears Scale 1:72 Metallic Details MDR7219

Metallic Details MDR7219 is a mixed-media detailing set for the SR-71 Blackbird in 1/72. It combines resin parts with a small photo-etched fret to refine the landing gear area and the wheel bay openings where thin edges and small brackets are easy to notice on an in-progress build.

The set includes 25 resin parts plus a 40 × 21 mm photo-etched board, supporting a more structured look around the bays and gear components without turning the work into full scratchbuilding.

The SR-71’s underside has large, clean openings around the gear area, so upgrades here affect both the model’s silhouette on its wheels and the “depth” you see when viewing from low angles.

For modelers: plan the sequence before glue: dry-fit wheel bay parts first, then check the gear leg alignment against the doors and bay edges. Use a simple spacing jig (card strip or ruler off the workbench) to keep left/right gear height consistent while adhesive cures. Prime resin and metal parts before painting, and handle the photo-etched pieces with flat tweezers to avoid unintended bends.

• Subject: SR-71 Blackbird
• Variant / Family: SR-71 family (kit-dependent)
• Scale: 1/72 (also written as 1:72)
• Product type: Detail set
• Type of equipment: Aircraft
• Recommended kit: for Any / Universal 1/72 SR-71 kits (fit is kit-dependent)
• Manufacturer: Metallic Details
• Country of manufacture: Ukraine
• Material: Photo-etched metal, resin parts
• SKU: MDR7219

This item is part of Metallic Details and belongs to Aftermarket and Wheel Bays & Landing Gear. For matching projects, browse 1/72 aircraft model kits and all Aircraft Model Kits.

FAQ

Does this set cover both landing gear and wheel bay areas?

Yes. The set is intended to detail the landing gear components and the wheel bay area on 1/72 SR-71 builds.

How should I attach the photo-etched parts?

Photo-etched parts are typically attached with cyanoacrylate (CA). Dry-fit first, then use small amounts of adhesive to avoid flooding fine edges.

How can I keep the SR-71 stance even after installation?

Dry-fit both sides and use a simple height reference (a spacer block or ruler) while the joints set, so left and right gear sit at the same height and angle.