SR-71A Blackbird, Nose cone (for Italeri) Scale 1:48 Metallic Details MDR4852

Metallic Details MDR4852 Resin Set provides a replacement/detail part for the SR-71A Blackbird nose cone in 1/48, designed for the Italeri kit (design credited by the manufacturer). The unique focus is the aircraft’s nose profile: this area is a strong visual reference point, and small shape differences can stand out on a finished Blackbird build.

The SR-71A’s forward fuselage lines are clean and uninterrupted, so a refined nose cone can help your model read “right” at a glance. This set is intended as an exterior upgrade for the Italeri kit, with final fit depending on your kit’s nose join and any internal support you add.

For modelers: dry-fit the resin nose to the kit fuselage and check the seam line under a strong light before committing to glue. Use a rigid alignment aid (a simple internal tab or pin) so the nose stays centered while the adhesive cures. After blending the joint, restore any lost panel lines carefully, then leave the nose detail installation until sanding is complete to avoid damaging edges.

• Subject: SR-71A Blackbird nose cone
• Variant / Family: SR-71A (kit-dependent)
• Scale: 1/48 (also written as 1:48)
• Product type: Resin Set
• Type of equipment: Aircraft
• Recommended kit: for Italeri
• Manufacturer: Metallic Details
• Country of manufacture: Ukraine
• Material: Resin
• SKU: MDR4852

This item is part of Metallic Details and belongs to Aftermarket and Exterior Details. For matching projects, browse 1/48 aircraft model kits and all Aircraft Model Kits.

FAQ

Is this nose cone made specifically for the Italeri 1/48 kit?

Yes. The set is listed for the Italeri 1/48 SR-71A Blackbird kit. Dry-fit before gluing to confirm the seam line and centering.

Do I need to add internal support for the resin part?

It can help. A small internal tab or pin can keep the nose centered while the adhesive cures and reduce the risk of a stepped seam.

When should I install the nose cone during the build?

Install early enough to blend the join and restore surface lines, then keep fine exterior details for later stages after major sanding is finished.