SUU-11B/A Minigun pod 7,62mm (1 pcs) (A-1, A-37, B-26K, F-84, F-86, F-100D, F-4J, AH-1G/J/S/T/W, CL-41G, O-2, OP-2E, AP-2H, AT-28, AT-38B, AU-23, OV-10) (3D printed) Scale 1:72 ResKit RS72-0415 for Aircraft / Helicopters Model Kit

ResKit RS72-0415 is a 3D printed resin SUU-11B/A 7.62mm Minigun pod (1 pc) in 1/72 scale for aircraft and helicopter builds. The model features defined pod contours and refined muzzle area detail, helping external gun pod installations appear sharper and more realistic.

Aftermarket resin accessory designed for aircraft scale model kits.

Highly detailed resin parts intended for accurate 1/72 scale aircraft models.

Gun pods are typically mounted on underwing pylons or dedicated stations and are visually prominent on light attack and support aircraft. Replacing simplified kit parts can improve surface definition and enhance the overall external configuration.

For modelers: carefully remove supports around the muzzle section and test-fit the pod to your chosen pylon before painting. Ensure the pod sits parallel to the aircraft centerline and check alignment from front and side views (kit-dependent).

Compatible aircraft

• Douglas A-1 Skyraider
• Cessna A-37 Dragonfly
• Republic F-84 Thunderjet/Thunderstreak
• North American F-86 Sabre/Sabre Dog
• North American F-100 Super Sabre
• McDonnell Douglas F-4 Phantom II
• Bell AH-1G Cobra
• Bell AH-1Z Viper
• North American OV-10 Bronco

Product Specifications

• Subject: SUU-11B/A Minigun pod 7.62mm
• Scale: 1/72 (also written as 1:72)
• Product type: Weapons / Gun Pod
• Type of equipment: Aircraft / Helicopter
• Recommended kit: Any / Universal - for compatible 1/72 kits (kit-dependent)
• Service / Subject country: USA
• Manufacturer: ResKit
• Country of manufacture: Ukraine
• Material: Resin / 3D Printed
• SKU: RS72-0415

This item is part of ResKit and belongs to Aftermarket. Browse more in ResKit Arms and Weapons or compare with Arms and Weapons (all brands). For matching builds, see Aircraft Model Kits, Helicopter Model Kits and 1/72 Model Kits.

FAQ

Will this pod fit all listed aircraft kits?

The set is marked Any / Universal, but pylon type and mounting dimensions vary between manufacturers. Always dry-fit before final installation (kit-dependent).

How should the pod be aligned?

Install the pod parallel to the aircraft centerline and verify alignment from multiple angles while the adhesive cures to maintain a clean configuration.

Does the 3D printed part require special preparation?

Remove supports carefully, wash the part, and apply a thin primer coat to preserve fine muzzle and panel detail in 1/72 scale.