SUU-16A 20mm gun pod (open gun bay) with centerline Pylon for McDonnell Douglas F-4 Phantom II (C,D) (1 pcs) (3D Printed) Scale 1:32 ResKit RS32-0470 for Aircraft Model Kit

ResKit RS32-0470 is a 1/32 set of the SUU-16A 20mm gun pod (open gun bay) with a centerline pylon for the McDonnell Douglas F-4 Phantom II (C/D) (1 pcs). The “open gun bay” presentation makes edges and internal shapes more noticeable, so clean geometry helps the centerline station look sharper after primer and paint.

This set is most useful when you want the pod and pylon to read as a single, well-aligned assembly rather than separate kit parts with mismatched profiles.

For modelers: dry-fit the pylon to the centerline station first, then test the pod alignment so it sits straight when viewed from front and rear. If parts include 3D printed supports, remove them in small steps, sand attachment points lightly, then wash parts before priming.

Product Specifications

• Subject: SUU-16A 20mm gun pod (open gun bay) with centerline pylon for McDonnell Douglas F-4 Phantom II (C/D) (1 pcs)
• Scale: 1/32 (also written as 1:32)
• Product type: Arms and Weapons
• Type of equipment: Aircraft
• Recommended kit: Any / Universal
• Manufacturer: ResKit
• Country of manufacture: Ukraine
• Material: Resin / 3D Printed
• SKU: RS32-0470

This item is part of ResKit and belongs to Aftermarket. Browse more in ResKit Arms and Weapons or compare with Arms and Weapons (all brands). For matching builds, see Aircraft Model Kits and 1/32 Aircraft Model Kits.

FAQ

What should I dry-fit first: the pylon or the pod?

Start with the centerline pylon fit to the kit station, then align the pod to the pylon. This helps keep the assembly straight and centered before glue and paint.

How do I remove 3D printed supports without damaging the open-bay edges?

Cut supports in small steps and avoid twisting thin edges. Light sanding at the attachment points and a wash before priming helps keep the outline crisp.

How can I keep the centerline assembly looking straight on the finished model?

Check alignment from front and rear during a dry-fit and mark the seating depth. Re-check once more before the glue fully cures so the pod does not cant to one side.