Triple Ejector Rack A/A37B-6 (TER-7) (5 pcs) (A-4, A-6, A-7, F-4, S-3, F-8, F-84F, F-100, F-105, F-15, A-1, A-10) Scale 1:48 ResKit RS48-0340 for Aircraft Model Kit

ResKit RS48-0340 provides five Triple Ejector Rack A/A37B-6 (TER-7) units for 1/48 aircraft builds. These racks are a key “busy” detail on many US aircraft loadouts, and a dedicated aftermarket set helps keep the rack shape, sway brace area, and overall geometry consistent across multiple pylons.

This set is useful when you want uniform stores presentation on a model with multiple wing stations, or when kit racks look simplified once paint and weathering are applied. It is listed as Any / Universal, with final fit depending on your kit pylons and chosen stores.

For modelers: test-fit each TER to the pylon before painting and decide the exact fore-aft position to match your stores spacing. If you drill mounting holes, do it in a simple jig so all five racks sit at the same angle. Prime first, then keep paint layers thin around small edges so the rack detail stays crisp.

Compatible aircraft

• Douglas A-4 Skyhawk
• Grumman A-6 Intruder
• Grumman EA-6 Prowler
• LTV A-7 Corsair II
• McDonnell Douglas F-4 Phantom II
• Lockheed S-3 Viking
• Vought F-8 Crusader
• Republic F-84 Thunderjet/Thunderstreak
• North American F-100 Super Sabre
• Republic F-105 Thunderchief
• McDonnell Douglas F-15 Eagle/Strike Eagle
• Douglas A-1 Skyraider
• Fairchild Republic A-10 Thunderbolt II

Product Specifications

• Subject: Triple Ejector Rack A/A37B-6 (TER-7) (5 pcs)
• Scale: 1/48 (also written as 1:48)
• Product type: Pylons / Bomb Racks
• Type of equipment: Aircraft
• Recommended kit: Any / Universal
• Manufacturer: ResKit
• Country of manufacture: Ukraine
• Material: Resin / 3D Printed
• SKU: RS48-0340

This item is part of ResKit and belongs to Aftermarket. Browse more in ResKit Pylons / Bomb Racks or compare with Pylons / Bomb Racks (all brands). For matching builds, see Aircraft Model Kits and 1/48 Aircraft Model Kits.

FAQ

Are these racks kit-specific?

No. They are listed as Any / Universal, but fit is kit-dependent and depends on pylon geometry and your chosen stores.

How do I keep all five racks aligned the same way?

Dry-fit each rack, mark a consistent position on the pylon, and drill mounting points using a simple jig so the angle and spacing match across the set.

Should I attach racks before or after painting?

Either can work, but test-fit and adjust first. If painting separately, keep contact points clean so the final glue joint is strong and aligned.