USAF Inboard Pylons for McDonnell Douglas F-4 Phantom II (2 pcs) (F-4C, RF-4C, F-4D, F-4E, F-4G, F-4F, F-4EJ) (3D printing) Scale 1:48 ResKit RS48-0446 for Aircraft Model Kit

ResKit RS48-0446 is a 1/48 Pylons / Bomb Racks set of USAF inboard pylons (2 pcs) for the McDonnell Douglas F-4 Phantom II, suitable for variants such as F-4C, RF-4C, F-4D, F-4E, F-4G, F-4F, and F-4EJ. The inboard pylons are a key visual element on Phantom loadouts, and this set is intended to provide cleaner pylon contours and sharper small edges where kit parts can look simplified.

Aftermarket resin accessory designed for aircraft scale model kits.

Highly detailed resin parts intended for accurate 1/48 scale aircraft models.

This upgrade is useful when your build uses visible inboard stores and you want matched left/right geometry with consistent alignment under the wing. Because mounting slots, locating tabs, and pylon-to-wing interfaces differ between kit brands and toolings, installation should be treated as kit-dependent even with an Any / Universal recommendation.

For modelers: dry-fit both pylons at the same time and compare their angle from front and rear views before glue cures. Test-fit the intended stores to confirm spacing and clearance, and keep primer coats thin so edge detail is not rounded off.

Product Specifications

• Subject: USAF inboard pylons for McDonnell Douglas F-4 Phantom II (2 pcs)
• Variant / Family: F-4C, RF-4C, F-4D, F-4E, F-4G, F-4F, F-4EJ (kit-dependent)
• Scale: 1/48 (also written as 1:48)
• Product type: Pylons / Bomb Racks
• Type of equipment: Aircraft
• Recommended kit: Any / Universal (kit-dependent wing mounting)
• Service / Subject country: USA
• Manufacturer: ResKit
• Country of manufacture: Ukraine
• Material: Resin / 3D Printed
• SKU: RS48-0446

This item is part of ResKit and belongs to Aftermarket. Browse more in ResKit Pylons / Bomb Racks or compare with Pylons / Bomb Racks (all brands). For matching builds, see Aircraft Model Kits and 1/48 Aircraft Model Kits.

FAQ

Will these pylons fit any 1/48 F-4 kit?

The set is Any / Universal, but wing mounting slots and locating tabs vary by kit tooling. Dry-fit first and adjust only the hidden contact areas if needed.

How do I keep left and right pylons aligned evenly?

Test-fit both sides together and compare from front and rear views. Mark reference points on the wing so each pylon sits at the same angle before glue cures.

Should I test-fit stores before final assembly?

Yes. A quick test-fit confirms spacing and clearance, and it helps avoid damaging paint when attaching stores later.